Product |
---|
Product type: | |
Product family: | |
AC mode |
---|
Input voltage range: | The range is from 100 V AC to 240 V AC | Tolerance -15% ... +10 % | |
Frequency range : | 50 Hz to 60 Hz | Tolerance ±10 Hz | |
Power backup time: | type. 53 ms (120 V AC) | type. 55 ms (230 V AC) | |
Current consumption: | type. 3.4 A (100 V AC) | type. 2.8 A (120 V AC) | type. 1.5 A (230 V AC) | type. 1.5 A (240 V AC) | |
Rated power consumption : | |
Protection system : | Protection against transient currents; Varistor, spark gap
gassed | |
DC mode |
---|
Input voltage range: | The range is from 110 V DC to 250 V DC | Tolerance -18% ... +40 | |
Current consumption: | type. 3 A (110 V DC) | type. 1.3 A (250 V DC) | |
Output data | Efficiency: | type. 92.8 % (120 V AC) | type. 93.8 % (230 V AC) | |
Short circuit resistance and idle test: | |
output power: | |
Start-up time: | < 100 ms (UOut (10 % ... 90 %)) | |
High reliability: MTBF | > 1,165,000 hours at 25 °C | > 700,000 hours at 40 °C | > 321,000 hours at 60 °C | |
Parallel connectivity: | Yes, for redundancy and increased power | |
Serial connectivity: | |
Assembly | Mounting method | Mounting on a mounting rail | |
Mounting position | DIN rail horizontal NS 35, EN 60715 | |
Dimensions | Width: 50 mm | Height: 130 mm | Depth: 125 mm | |
Ambient conditions | Degree of protection | |
Ambient temperature | from -25 °C to 70 °C (> 60 °C derating: 2.5 % for each K) | |
Standard designation: Standards/Regulations | Railroad applications | EN 50121-3-2 | EN 50121-4 | EN 50121-5 | EN 50163 | IEC 62236-3-2 | IEC 62236-4 | IEC 62236-5 | |
HART FSK Physical Layer Test Specification Compliance | Output voltage UOut compatible | |
Normative limitation of higher harmonics of the network current | |
Normative electrical safety | |
Atmosphere threatening to explode | IEC 60079-0 | IEC 60079-7 | IEC 60079-11 | IEC 60079-15 | |
Normative low protection voltage | IEC 61010-1 (SELV) | IEC 61010-2-201 (PELV) | |
Normative certain separation | IEC 61558-2-16 | IEC 61010-2-201 | |
Standard - Safety requirements for equipment
measuring, control, regulation and laboratory equipment | |
Charging the battery | |
Approval - semiconductor industry requirements for
with respect to supply voltage drops. | SEMI F47-0706, EN 61000-4-11 | |