Product |
|---|
Product type: | |
|---|
Product family: | |
AC mode |
|---|
Input voltage range: | | The range is from 100 V AC to 240 V AC | | Tolerance -15% ... +10 % | | The range is from 115 V AC to 240 V AC | | Tolerance ±10 % (UL) | |
|---|
Frequency range (fN): | | 50 Hz to 60 Hz | | Tolerance ±10 % | |
Power backup time: | | > 27 ms (120 V AC) | | > 28 ms (230 V AC) | |
Current consumption: | | type. 2.6 A (100 V AC) | | type. 2.2 A (120 V AC) | | type. 1.2 A (230 V AC) | | type. 1.1 A (240 V AC) | |
Protection system: | | Protection against transient currents; Varistor | |
DC mode |
|---|
Input voltage range: | | The range is from 100 V DC to 240 V DC | | Tolerance ±10 % | | The range is from 160 V DC to 240 V DC | | Tolerance ±10 % (UL) | |
|---|
Current consumption: | | type. 2.7 A (100 V AC) | | type. 1.1 A (240 V AC) | |
Output data | Efficiency: | | type. 94.5 % (at 120 V AC ) | | type. 95.5 % (at 230 V AC ) | |
Reducing the rating parameters: | | < 100 V AC (1 % for each V) | | > 60°C (2.5% for each K) | |
output power: | |
Start-up time: | | ≤ 1 s (UOUT (10 % ... 90 %)) | |
High reliability: MTBF | | > 2,300,000 hours at 25 °C | | > 1,300,000 hours at 40 °C | | > 610,000 hours at 60 °C | |
Parallel connectivity: | | Yes, to increase power and redundancy | |
Serial connectivity: | | Yes, to increase voltage (observe SELV limit) | |
Syngalization | Signaling methods | | LED DC OK - signal status operation | |
Function | | Visual indication of working condition. | |
Assembly | Mounting method | | Mounting on a mounting rail | |
Mounting position | | DIN rail horizontal NS 35, EN 60715 | |
Dimensions | | Width: 40 mm | | Height: 135 mm | | Depth: 132 mm, 125 mm (Depth of device (DIN rail mounting)) | |
Ambient conditions | Degree of protection | |
Ambient temperature | | from -25 °C to 70 °C (> 60 °C derating: 2.5 % for each K) | |
Standard designation: Standards/Regulations | EN 61010-1 | | III (≤ 2000 m) | | II (≤ 5000 m) | |
EN 61010-2-201 | | III (≤ 2000 m) | | II (≤ 5000 m) | |
Safety in the use of power supplies up to 1100 V (clearances
insulation) | |
Electrical safety | |
Equipping electrical power equipment with auxiliary electronic devices | |
Safety requirements for measuring devices,
control, regulation and laboratory | |
Very low voltage PELV | | IEC 61010-1 (SELV) | | IEC 61010-2-201 (PELV) | |
Safe insulation | | IEC 61558-2-16 | | IEC 61010-2-201 | |
Permissible levels of harmonic current emissions | |
Network fluctuation / undervoltage condition | |
